I saw a thread about this forum on www.fullsizechevy.com earlier today.
I'd like to share my current project with the board - 1967 Chevy C10 stepside pickup we've had since 1991.
Here is a shot from the summer of 2003:
We kept it a nice driver until April 2004 when it was hit and caused the damage below
This is the current state of the project.
Chassis is a 1972 1/2 ton 5 lug, front disc, dual exhaust, OEM Big Block mounts, front sway bar setup. Powdercoated gloss black from front to rear.
Rear fuel tank is from FuelCellGuy - www.aluminumfuelcell.com
Moog pitman and idler arms with local rebuilt power steering gear - Harry's
PST Front end rebuild kit (rubber) - www.p-s-t.com
PST Trailing arm bushings (Poly)
Early Classic 4/6 drop kit - www.EarlyClassic.com
Rear end is a GM 12 Bolt, DTS 3.73, Posi, Moser axles - www.drivetrainspecialists.com
Stainless Steel Brake lines & hoses - www.InlineTube.com[/list]
Next up is the parking brake cables. Once that is done, Everything gets torqued down and the chassis is complete
Cab is currently awaiting some rust repair on the frame mounts, floors and corners along with some minor mods.
Here is a buildup thread with many more pictures and details 8)
I'd like to share my current project with the board - 1967 Chevy C10 stepside pickup we've had since 1991.
Here is a shot from the summer of 2003:
We kept it a nice driver until April 2004 when it was hit and caused the damage below
This is the current state of the project.
Chassis is a 1972 1/2 ton 5 lug, front disc, dual exhaust, OEM Big Block mounts, front sway bar setup. Powdercoated gloss black from front to rear.
Rear fuel tank is from FuelCellGuy - www.aluminumfuelcell.com
Moog pitman and idler arms with local rebuilt power steering gear - Harry's
PST Front end rebuild kit (rubber) - www.p-s-t.com
PST Trailing arm bushings (Poly)
Early Classic 4/6 drop kit - www.EarlyClassic.com
Rear end is a GM 12 Bolt, DTS 3.73, Posi, Moser axles - www.drivetrainspecialists.com
Stainless Steel Brake lines & hoses - www.InlineTube.com[/list]
Next up is the parking brake cables. Once that is done, Everything gets torqued down and the chassis is complete
Cab is currently awaiting some rust repair on the frame mounts, floors and corners along with some minor mods.
Here is a buildup thread with many more pictures and details 8)
Comment