August 21st, 2012 05:34 PM
You could move the shock anywhere you wanted to with these, it's strictly a dampener and doesn't locate anything. The only problem with that is how effective it is at dampening, but that's something you can easily figure out with some simple math and a little online research. How good are your fabrication skills? You could use levers and bellcranks and mount them horizontally if you really wanted, it's just a matter of what your end goal is.
August 22nd, 2012 06:53 AM
I have a picture stuck in a phone, I will try to get another one that I can send to show you how it wraps around the frame rail on the bottom. But the reason I made this heavy is because we are old school and are going to be running air shocks, which puts alot more pressure on that tower.
Originally Posted by tedly
August 23rd, 2012 03:56 AM
Interesting food for thought. I'm going to chew on this for awhile. Thanks!
Originally Posted by hauen
If you can get it, I would greatly appreciate it.
Originally Posted by anotheridiot