You can't go wrong with a Rotary Lift....
http://www.rotarylift.com/lifts_light.aspx
U.S. Company to.......
You can't go wrong with a Rotary Lift....
http://www.rotarylift.com/lifts_light.aspx
U.S. Company to.......
Last edited by TC; July 19th, 2012 at 01:47 PM.
Like I said, its all in getting replacement parts. I dont doubt every one is bought from the same supplier. Our deal, we had a bad fitting on the hydraulic line that goes up and over to the cylinder opposite of the pump and they ups's one the same day, no questions, didnt want the old one back. The quality is ok, we have the Atlas OH 10X, Xtra wide, extra tall that had no trouble with the Chevy express 3500 full size van when we rebuilt the trans. I would probably like the pins to be a little longer that hold the arms on, we just make sure to pound them all the way in before a lift. Its not that they are short, its the taper on the bottom that make it seem like it barely makes it thru the bottom yoke. But as far as variety, they have all different kinds that fit any need.
More lift woes.....
http://www.429-460.com/t14879-anyone...ome-ass-for-me
1983 Mustang GT 545/C6 - 10.56 @ 127.38 - www.foureff.com - Four Eyed Fords Forum
Drag Week 2012 - Street Race BB N/A runner-up
and mirrored here:
http://www.yellowbullet.com/forum/sh...d.php?t=484577
1983 Mustang GT 545/C6 - 10.56 @ 127.38 - www.foureff.com - Four Eyed Fords Forum
Drag Week 2012 - Street Race BB N/A runner-up
Mine is a WHIP from Texas - got it from Greg smith when they still carried them, never had a single problem with it going on 8 years of hobby use.
This a real Greek tragedy, when the best intentioned goal to buy American runs into the difficulty of running a small business in this country these days. I live in the poster child state for killing small business.
Our state motto has been changed to "tax the rich, feed the poor, 'till there are no rich no more".
Rich being defined as anybody with enough gumption to try and run a private sector business.
End rant.
Last edited by CDMBill; August 3rd, 2012 at 09:43 AM.
Drag Week 2013 - bringing something different or running a different class: Project Clueless