Bought the car without an engine or trans for $350.00 at an impound auction. Bought a supposed rebuilt 400 engine on Craigslist for $850.00. It was rebuilt but they forgot to put some of the oil gallery plugs in it, so I had to pull the engine and put in new bearings. While I had it out I replaced the fuelie heads with EQ Vortec heads with a little home porting. I also stuck in a Voodoo flat tappet. Just got it broke in. I'm going through some of the safety issues now like brakes, lights etc.

Stock rebuilt Chevy 406, EQ Vortec heads with some home porting, Lunati Voodoo flat tappet, Airgap intake, 780 vacuum secondary Holley, HEI, 6 quart oil pan,1/5/8 inch headers, Summit 2 1/2" mandrel bend exhaust,
350 turbo trans, Summit aluminum radiator. Stock 8.5" rear end with highway gears

Stock disc/drum. Shackles and Air shocks!!!!?
I have some Competition Engineering traction bars to go on next.

Chevy Rally wheels and BFG 225's and 275's

Not done yet, looks like Earl Schieb painted the black over the original green

Looks like somebody used cheap spray paint to try to change the green interior to black.

Not quite yet