153 tooth flywheel for a 4.3v6

[mikeasis]

Would anyone know of an application where a 4.3v6 with a manual trans had a 153 tooth flywheel?
I am putting a manual behind an 86 4.3v6 and cannot find a flywheel for it,unfortunatly i cannot use the bigger flywheel. Everyone wants to say i can use one from a 350 and no offense here but i need some kinda proof,matching part numbers,something. Ive read several places the 4.3 is balanced differently than the sbc, which kinda makes sense it is missing 2 cylinders.

Ive heard the astro van had a 153 tooth flywheel at one time but cannot find it at any parts stores.


any help would be appreciated.

mike

[squirrel]

Re: 153 tooth flywheel for a 4.3v6

the small bolt pattern one piece seal flywheel used on the 305 and 350 also works on the 4.3, I checked this out and put one from a 4.3 onto a 350 and it worked fine. look up the part numbers at a place like rockauto, you'll see it's true. try for a Vette or Camaro 87-96.

[Dans 83]

Re: 153 tooth flywheel for a 4.3v6

You can use a SBC flywheel but I think no matter what flywheel you use it may need to be balanced as they were individually balanced at the engine plant. I don't recall any being internally balanced.