cool rear end rebuilding fixture that i built (now powdercoated)

[6pakdakota]

i built this fixture to help when i learn to setup rear ends and rebuild transmissions. im sure i will find other uses for it also.

[horsewidower]

Really nice piece of work. Wish I could fab like that.

[squirrel]

That's beautiful! I have a piece of 1/8" thick steel, about 2" x 5" with two holes drilled in it that I bolt to the rear housing and clamp in the vise. Yours looks way more useful

[milner351]

Who ever taught you how to tig weld should be rewarded! Nice work!

[TC]

Nice!!, such pretty welds. ;)

[Scott Liggett]

Nice!!, such pretty welds. ;)

I'll say. I don't suppose you have one of those lying around for 12 bolts? ;)

[6pakdakota]

[

I'll say. I don't suppose you have one of those lying around for 12 bolts? ;)
[/quote]

this one should have no problem bolting up to a 12 bolt. i would sell them but there probably wouldnt be much of a market for them

[fabricatordave]

hell i have never seen one that pivots like that i should do that to the one i built for trannys.

and there is people that would buy that i would think i would are the peices cad cut

[6pakdakota]

i cut these pieces with a band saw, but if i did sell them i would have cut them some other way. it takes way too long to cut this stuff out by hand.

[SpiderGearsMan]

looks like a bench mule , I bought one from mark williams many moons ago