no oil from passenger side pushrods...

[1badmonkey]

got oil out the driver side, have been running the drill for 15 - 20 minutes and the passenger sid eis dry. help

[TheSilverBuick]

Engine type?

Mine were sporatic. Started with three on the drivers side, then two on the passenger side, then I lost track of which ones got oil next, it just took some time. I was probably on it for at least 30 minutes before all the rockers had oil on them.

[1badmonkey]

yes engine type. duh. frustrated

350 chevy

the whole driver side is flowing.

letting the drill cool down now while seeking advice.

[BUBBA]

rotate the engine some with a pull bar. see if that gets the oil up there.

[fabricatordave]

what are you using to prime with ?if it is just a shaft with out the collar on it like the bottom ot the dist. you may not get oil on the other side

[1badmonkey]

Dave got it, I was using just a shaft with no collar. got another distributor(hard to do on a sunday in a small damn town) ..
ripped it apart, ground down the shaft to fit in the drill, and boom... oil on both sides.

thanks the input guys!