Well My Ride Should Be Ready

[MR P-BODY]

Over the winter(while I was here) installed fuel injection and raised the
front end of my ride... last year I banged my headers on the FINE ROADS
here in Mich so I finally decided to lift the front 1.25" to get some ground
clearance.. it BARELY had 3" before and in some spots it wasnt 3" so I
did that.. took more work than just turning up the springs on the struts.. and
the springs were to stiff... I had to cut the upper mounts off and lowered
them 1.25" plus changed springs from 325# to 275"... the struts were close
to topping out just sitting there at curb height... I hope these springs settle
a little like the other set... I'm still a 1/4" high on the design height .... well
any ways I just got done doing the alignment so all I need to do is bleed
the brakes then start driving it so the injection learns.....but its basically done
if they are ever really done ... LOL ... now to see if I get in...sorry for the novel

[clarks body shop]

So are you putting your car in daily driver?

[MR P-BODY]

So are you putting your car in daily driver?

Most likely being that I can only run 10.0 due to the license issue(the
lack of one and cant get one)... I thought about unlimited just for kicks
and I might get on the way early.... but 90% sure it'll be DD

[clarks body shop]

Thats what I am thinking.Turn it down and run DD this year.

[quick 52]

Thats what I am thinking.Turn it down and run DD this year.

Clark how fast did u get it running last year

[MR P-BODY]

Dale(quick32) stopped by today to help me bleed the brakes..
took just a couple of minutes but its done.. thanks Dale.. I wanted
to take it out for a putt but I had other work to do

[clarks body shop]

Top secret

[HBZ_81_C3]

Top secret

I know how fast it went while passing idiots in Kansas...

[clarks body shop]

Now that was fun ,let's do it again jon

[greenXpress]

DD is no more......................so I will be one of the slowest in Street Machine Eliminator.

[MR P-BODY]

DD is no more......................so I will be one of the slowest in Street Machine Eliminator.

Yeah I know its not DD any longer... just hard to stop using
that name for it

[quick 52]

SME the go to class... Still the red headed step child

[MR P-BODY]

I'm not having very good luck with this trans... I took the car out for a test run
down the street... when it hit high gear with the OD on.. it locked up the rear
tires... I did another check.. it only locks up in high gear with the OD on.. with
the OD off it works fine.... so I'm pulling the engine and trans out AGAIN.. I
have to pull the engine/trans together(cant pull just the trans)... I got it ready to
lift out but I blocked my cherry picker in with 500 lbs of fertilizer so I have to
move that first.... this is getting REAL OLD pulling this trans.... I guess I better
learn to build this thing right