Announcement Announcement Module
Collapse
No announcement yet.
Bonnet vs. Box Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bonnet vs. Box

    I am putting a Novi 2000 on my BBC and am trying to decide between a bonnet or an enclosed box for the carb. I will be using a Quick fuel Q-750-BAN carb. It will also be set at 8-10 lbs of boost. Any and all responses are appreciated.

    Thanks.

  • #2

    Re: Bonnet vs. Box

    Re: Bonnet vs. Box

    Of course its up to you what you use. Personally I would use a hat from Extreme Velocity or CSU. And a carb from CSU or C&S.

    Comment


    • #3

      Re: Bonnet vs. Box

      Re: Bonnet vs. Box

      Use a bonnet! csu/extreme velocity or even the spectre bonnet (low buck) works well

      Comment


      • #4

        Re: Bonnet vs. Box

        Re: Bonnet vs. Box

        The box has issues. It can work but NONE of the guys make big power are using them.
        Most mass production boxes have issue at much over 7psi. We have switched boxes to bonnents and pick up power, gotten better A/F, and been able to run more boost with less issues.

        EV Bonnets are the best.
        Carbs, CSU or C&S don't bother with the other.
        These are the only two investing in the blow-thru at the ground floor.
        Others are coming on board but only after CSU & C&S made the ground work.
        Many of these new comers said it would never work.
        If you are keeping the QF send it to CSU and have him mod it for blow-thru.

        If I can help feel free to give me a shout.

        Comment


        • #5

          Re: Bonnet vs. Box

          Re: Bonnet vs. Box

          its hard to change jets in a box
          2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
          First to run in the .90s .80s and .70's in SBN/A
          2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
          2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!

          Comment


          • #6

            Re: Bonnet vs. Box

            Re: Bonnet vs. Box

            Thanks everyone.

            Robert, I will probably be in contact with you.

            Thanks

            Comment


            • #7

              Re: Bonnet vs. Box

              Re: Bonnet vs. Box

              Thanks everyone.

              Robert, I will probably be in contact with you.

              Thanks
              Cool!

              Also swing by The Turbo Forums tons of info.

              Good Luck.

              Comment

              Working...
              X