I've got an older Fat Man Fab Mustang ii front end on the Pumpkin with shot bushings. Does anyone have any knowledge on replacement bushing for these. I called Fat Man and there want $60 a set, and wouldn't give me any part numbers to try to find at the local parts house. They are tubular lower control arms, non factory style w/o radius rods. I haven't taken any measurments from them yet. Just seeing if anyone has come across something like this before.
Announcement
Collapse
No announcement yet.
Aftermarket Mustang ii control arm bushings question
Collapse
X
-
Originally posted by min301 View Posthttp://www.moog-suspension-parts.com...rod=MOOG-K8211
Straight from moog...call a local supplier, but there you have the part number,
and a pic. Plus from Moog...$10.38 each.
That's exactly what I thought at first, but those are for a factory style lower control arm with a radius rod.
Here are some pics of both. The top pic is like what I have, the second pic is the other style that those bushings may work on.
Comment
-
Update time
I just spoke with Fatman Fab. again and got the lower control arm bushings ordered. I guess something got miscommunicated when I spoke with them before. The lower bushings cost $24 for a set, which does both sides, so that’s a deal. The nice salesman also slipped up and gave me a Moog part number for the lower ball joint as a K772. I have also been measuring and comparing and for the upper control arms I have the factory Mustang ii bushings and balls will work. If the bushings have a good part number on them I will post it up to, to possibly help someone else in the future.
Comment
Comment