Originally posted by min301
View Post
Announcement
Collapse
No announcement yet.
DISCUSS - brake line compression fittings
Collapse
X
-
Last edited by Huskinhano; September 6, 2011, 08:49 PM.TomOverdrive is overrated
-
Originally posted by BOOOGHAR View Posti know brake pressure hovers round 3000 psi, I have all those kinda tools BUT I just cant seem to find the right fittings and I dont know where to look besides the local autoparts houses
Comment
-
OK, time to do this again (I've made this post before). There are compression fittings and then there are compression fittings. Industrial compression fittings such as Swagelok or Parker-Hannifin are good to several thousand pounds and are completely safe for use in brake systems - but that doesn't mean your state inspector will know the difference. Hardware store (or parts store) brass compression fittings are NOT the same deal. If the ferrule is shaped like a barrel DO NOT use them in a brake system.
Russel's right - hardware store compression fittings caused my underhood fire in the Buzz Bomb (hope to get that straightened out over the winter). The ferrule nut actually split on one of my fuel connections and, with the push of a Holley Blue, sprayed fuel on the distributor. A little spark and BOOM! Hardware store compression fittings are no longer made in the USA and come from Sri Lanka or some such place. NOT TO BE TRUSTED.
Find your Swagelok or Parker dealer in your area if you really want to use compressions. I tried to cut corners and look what it got me - and that was just at fuel pressures. Don't be like Dan. And as the guys said, really you should go with flares although I've never had much luck making them at home. Maybe one of those hydraulic flaring tools??
Dan
Comment
-
Originally posted by DanStokes View PostOK, time to do this again (I've made this post before). There are compression fittings and then there are compression fittings. Industrial compression fittings such as Swagelok or Parker-Hannifin are good to several thousand pounds and are completely safe for use in brake systems - but that doesn't mean your state inspector will know the difference. Hardware store (or parts store) brass compression fittings are NOT the same deal. If the ferrule is shaped like a barrel DO NOT use them in a brake system.
Russel's right - hardware store compression fittings caused my underhood fire in the Buzz Bomb (hope to get that straightened out over the winter). The ferrule nut actually split on one of my fuel connections and, with the push of a Holley Blue, sprayed fuel on the distributor. A little spark and BOOM! Hardware store compression fittings are no longer made in the USA and come from Sri Lanka or some such place. NOT TO BE TRUSTED.
Find your Swagelok or Parker dealer in your area if you really want to use compressions. I tried to cut corners and look what it got me - and that was just at fuel pressures. Don't be like Dan. And as the guys said, really you should go with flares although I've never had much luck making them at home. Maybe one of those hydraulic flaring tools??
Dan
to many don't know, nor care what the differences are, in the quality of the fittings from one to the other, and I've seen what happens when they fail.. and watchs shop owners loose it all.. in court..
a jury of your peers will not care if it was designed to work at 5000psi if the law says no compression fittings on brake lines.Last edited by Stich496; September 8, 2011, 09:41 AM.
Comment
-
Originally posted by Stich496 View Postsorry, I don't care if the compression fitting can take 100000lb it has no place on a cars braking system.. period!!!!!!!!!!
to many don't know, nor care what the differences are, in the quality of the fittings from one to the other, and I've seen what happens when they fail.. and watchs shop owners loose it all.. in court..
a jury of your peers will not care if it was designed to work at 5000psi if the law says no compression fittings on brake lines.
the only reason I have a flare kit is for brakes.. may not get a double, but my little 2300# ricer uses rubber grommets, with the flare.
I found with the single flares, one can make the flare exactly as fat as the female entrance..a double flare cannot do that...unless a machine making them. I suppose that is another argument.
I agree about compression fittings. I used that once when I was a kid.. really silly outcome. In fact I think it was an inspector who said "those would be banned soon".
that was the 80s.Previously boxer3main
the death rate and fairy tales cannot kill the nature left behind.
Comment
Comment