RacerRick
January 15th, 2009, 09:00 AM
462 Casting double hump SBC heads - virgin, still have the factory valve job, and were off a good running low mile 67' 327-300hp motor. There is zero valve recession, and the heads are just refaced and looked over by my machinist. 1.94/1.50 valves, and a 64cc chamber. - $350
305 heads - 801 castings off a good running motor, have not been checked out however - $50
Factory aluminum Q-jet intake for SBC - early 80's - $40
Edelbrock Performer SBC intake with EGR - has a small crack in the bottom of the head riser which doesn't affect the operation if you block it off (I always block it off) - $50
305 heads - 801 castings off a good running motor, have not been checked out however - $50
Factory aluminum Q-jet intake for SBC - early 80's - $40
Edelbrock Performer SBC intake with EGR - has a small crack in the bottom of the head riser which doesn't affect the operation if you block it off (I always block it off) - $50